Archive for the ‘GE Oven Parts’ Category

GE Oven Bake Element (WB44X5082)

Thursday, February 1st, 2007

This is a closed hinged GE bake element used in electric self cleaning ovens. It will fit some GE made ovens such as GE, Hotpoint, and RCA. You can find measurements for this bake element below the photo. Be sure to check your model number to make sure this bake element is the right replacement for your GE self cleaning oven.

Tips on checking for a bad element:

  • Check for body damage. If you see burn marks on the element, it probably needs to be replaced.
  • Using an ohmmeter, you could test the bake element for continuity. If the ohmmeter shows no continuity, the element needs to be replaced.

This bake element will fit some GE, Hotpoint, and RCA made self cleaning ovens. Made by GE. Approximate measurements: Length: 15″, width: 18″, spacing between terminals: 1-1/4″. Part Number: WB44X5082.

GE Oven Bake Element (wb44x200)

Wednesday, December 6th, 2006

One of the few reasons why your GE oven isn’t heating could be because of the bake element. There’s a couple of ways to check. I would first look at the bake element to see if there are any burn marks. If there are, you probably need a new bake element. The other way is to check for continuity using an ohmmeter. If the ohmmeter tests for no resistance, the bake element is bad.

ge bake element

This bake element can be used on some GE and Hotpoint ovens. Size: width: 13-1/4″, length: 16-3/4″, spacing between the terminals: 1-1/4″. Made by GE. Part Number: wb44x200.